Description
Reducer:
- Function: A reducer is available for insertion into the ball-type jet. This reducer is designed to decrease the flow rate by 40% compared to the original flow rate provided by the jet.
Key Points:
- The flow rate of the ball-type jet is dependent on the inlet water speed. Higher inlet speed results in a higher flow rate.
- The reducer offers flow rate control, allowing you to adjust the water output from the jet by 40%.
Inferences (assuming the reducer has a constant reduction rate):
- At a maximum inlet speed of 4 m/s, with the reducer inserted, the estimated flow rate would be: 14.03 m3/h * (1 – 40%) = 8.42 m3/h
- At a maximum inlet speed of 3 m/s, with the reducer inserted, the estimated flow rate would be: 10.52 m3/h * (1 – 40%) = 6.31 m3/h
Please note: These are estimated flow rates based on the assumption of a constant 40% reduction by the reducer. The actual flow rate with the reducer might vary depending on the specific reducer design and water pressure
Reviews
There are no reviews yet.